PAPER CUTTING AND SHEETING MACHINE
One Roller High Speed Roll Copy Paper Cutting Machine Model DTCP-A4
Introduction of One Roller High Speed Roll Copy Paper Cutting Machine
1. Non-shaft paper rising shelves of the ground controlling system------Two sets
2. Advanced tension controlling system ------ Four sets.
3.Four sets of anti-warping mechanisms------Four sets.
4. Longitudinal cutting knife groups------six sets.
5. Simultaneous cross-cutting knife groups-----One set.
6. High-speed paper feeding system----- One sets
7. Low-speed paper feeding system----- One sets
8. Waste paper automatically discharging system-----One set.
9. Making papers in order of 2D oscillation,
srew rod lifting device of paper reams collecting system------One set.
10. PLC reams of paper counting device------One set.
11. Paper reams longitudinally and transverse discharging equipment-----One set.
12. PLC error alarm machine haulting system and PLC controlling equipment ------One set.
Main Technical Parameter One Roller High Speed Roll Copy Paper Cutting Machine:
<-------- Can Move Left or Right -------->
Gross width | 846mm |
Net width | 840mm |
Number of cutting | 1 rolls 4 slittings-A4 210mm(width) |
Diameter of paper roll | 400-1200mm |
Diameter of paper roll's core | 3"(76.2mm)-6(152.4mm) |
Paper grade | High grade copy paper,writing paper, two-side offset paper etc. |
Weight of paper sheet | 60-100g/ |
Length of paper cutting | A4(297mm) |
Paper quantity | 0-500pages |
Ream height | 65mm(Max) |
Designing speed of paper cutting | 160m/min |
Times of cutting | 538/min |
Cycle time of ream exhausted | 4.3/min |
Production speed of paper cutting | 130m/min |
Times of cutting | 437/min |
Cycle time of ream exhausted | 3 Cycles/min(5-6 reams/min) |
Load of paper cutting | (max)400g/m2(4×100gm2) |
Paper cutting accuracy | ±0.2mm(Permissible error) |
Paper cutting condition | 1. Speed not change 2.Paper roll with no breakage 3. Qulified paper rolls. |
Transmission | AC Frequency conversion,stepless speed regulating |
Main power source | 3phase/4line/380v/50Hz |
Adjustable voltage | 220V AC/22V DC |
Installed capacity | 22KW |
Air consumption | 300NL/min |
Pneumatic pressure | (Min)0.6mpa---(Max)0.8mpa |
Overall dimension(cutting machine) | 16000*2750*2100mm |
Overall Weight | 12T |
Our company adheres to the service tenet of 'quality wins'. According to the different needs of users and through rigorous production process and quality management, we will deliver higher quality One Roller High Speed Roll Copy Paper Cutting Machine, to our customers. Do everything possible to carry out service innovation and tap the service potential is the most central content of our management work, and tilting to customers is our service principle that we must persevere. We take technology as the guide, uphold the advanced business philosophy, providing users with high-quality products and good services.
HOT LINE: 0086-13957777629
